Bezahlverfahren
TMC8462-BA +BOM
Product TMC8462-BA is an EtherCAT slave controller
AN-
Hersteller:
-
Herstellerteil #:
TMC8462-BA
-
Datenblatt:
-
Series:
EtherCAT®
-
Programmable:
Not Verified
-
Protocol:
Ethernet
-
Function:
Controller
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TMC8462-BA, guaranteed quotes back within 12hr.
Verfügbarkeit: 7170 Stck
Bitte füllen Sie das kurze Formular unten aus und wir werden Ihnen umgehend ein Angebot zukommen lassen..
TMC8462-BA Allgemeine Beschreibung
Ethernet Controller SPI Interface 121-BGA (9x9)
Hauptmerkmale
- Standard compliant EtherCAT slave controller
- 8 High Voltage I/Os (up to 35V, 100mA)
- 2x switching regulator for system supply
- Multifunction block comprises Watchdog, 4 PWM outputs and Step/Dir generator
- 2 integrated 100Mbit Ethernet PHYs
Spezifikationen
Category | Integrated Circuits (ICs)InterfaceControllers | Series | EtherCAT® |
Programmable | Not Verified | Protocol | Ethernet |
Function | Controller | Interface | SPI |
Standards | - | Voltage - Supply | 3.15V ~ 3.45V, 4.75V ~ 34V |
Current - Supply | - | Operating Temperature | -40°C ~ 125°C (TJ) |
Base Product Number | TMC8462 |
Servicerichtlinien und andere
After-Sales- und Abwicklungsbezogen
Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:
[email protected]Versandart
AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..
365-Tage-Produkt
Qualitätsgarantie
Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.
In Stock: 7.170
Minimum Order: 1
Menge. | Einzelpreis | Ext. Preis |
---|---|---|
1+ | - | - |
Die unten angegebenen Preise dienen nur als Referenz.
Of the 3 modules ordered, one did not earn. A little later it turned out that the other two work with failures. The problem was in poor contacts between the display itself and the board. At the top of the module there is a contact pad that connects the board to the display, there is received contact, because. Between the board and the display is a small backlash. Solving the problem is simple: received the two upper ear-latches by pressing the board to the display. After that, all three modules work stably.