Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

TPA3112D1QPWPRQ1 +BOM

Automotive, 25-W, 1-ch, 8- to 26-V analog in Class-D audio amplifier w/ SpeakerGuard™

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

TPA3112D1QPWPRQ1
Datenblatt:

TPA3112D1QPWPRQ1 Datenblatt (PDF)
Series:

Automotive, AEC-Q100, SpeakerGuard™
Type:

Class D
Output Type:

1-Channel (Mono)
Max Output Power X Channels @ Load:

25W x 1 @ 8Ohm
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an TPA3112D1QPWPRQ1

TPA3112D1QPWPRQ1 Allgemeine Beschreibung

With its efficient Class-D architecture, the TPA3112D1-Q1 is designed to efficiently drive bridge tied speakers, offering exceptional performance and reliability. Advanced EMI Suppression Technology enables the usage of affordable ferrite bead filters at the outputs while ensuring EMC compliance. The SpeakerGuard™ protection circuitry system is a key highlight, featuring an adjustable power limiter and a DC detection circuit. The adjustable power limiter empowers users to set a virtual voltage rail lower than the chip supply, effectively limiting the current through the speaker. Meanwhile, the DC detection circuit is equipped to measure the frequency and amplitude of the PWM signal, taking necessary action such as shutting off the output stage if input capacitors are damaged or shorts are detected on the inputs. Capable of driving a mono speaker with an impedance as low as 4 Ω, the TPA3112D1-Q1 boasts high efficiency (exceeding 90%), eliminating the need for an external heat sink during music playback. Furthermore, the outputs are comprehensively protected against shorts to GND, VCC, and output-to-output, with a built-in auto-recovery feature for short-circuit and thermal protection

Hauptmerkmale

Rapid Charging Capability
Long Cycle Life: 500 Cycles
Durable Construction for Outdoor Use

Anwendung

Immersive audio experience
Advanced audio processing
Effortless installation

Spezifikationen

Category	Integrated Circuits (ICs)LinearAmplifiersAudio Amplifiers	Series	Automotive, AEC-Q100, SpeakerGuard™
Type	Class D	Output Type	1-Channel (Mono)
Max Output Power x Channels @ Load	25W x 1 @ 8Ohm	Voltage - Supply	8V ~ 26V
Features	Depop, Differential Inputs, Short-Circuit and Thermal Protection, Shutdown	Mounting Type	Surface Mount
Operating Temperature	-40°C ~ 125°C (TA)	Base Product Number	TPA3112
Audio input type	Analog Input	Architecture	Class-D
Speaker channels (max)	Mono	Rating	Automotive
Power stage supply (max) (V)	26	Power stage supply (min) (V)	8
Load (min) (Ω)	4	Output power (W)	25
SNR (dB)	102	THD + N at 1 kHz (%)	0.05
Iq (typ) (mA)	40	Control interface	Hardware
Closed/open loop	Closed	Analog supply (min) (V)	8
Analog supply voltage (max) (V)	26	PSRR (dB)	70
Operating temperature range (°C)	-40 to 125

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..