Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

UCC21530QDWKRQ1 +BOM

Dual-channel gate driver for automotive applications with 4A and 6A output current capabilities, featuring a 5

UCC21530QDWKRQ1 Allgemeine Beschreibung

The UCC21530QDWKRQ1 is a gate driver IC that provides a robust and reliable solution for controlling power semiconductor switches like MOSFETs and IGBTs. It is designed to enhance the efficiency and performance of power conversion systems.

The UCC21530-Q1 is an isolated dual-channel gate driver with 4-A source and 6-A sink peak current. It is designed to drive IGBTs, Si MOSFETs, and SiC MOSFETs up to 5-MHz with best-in-class propagation delay and pulse-width distortion.

The input side is isolated from the two output drivers by a 5.7-kVRMS reinforced isolation barrier, with a minimum of 100-V/ns common-mode transient immunity (CMTI). Internal functional isolation between the two secondary-side drivers allows a working voltage of up to 1850 V.

This driver can be configured as two low-side drivers, two high-side drivers, or a half-bridge driver with programmable dead time (DT). The EN pin pulled low shuts down both outputs simultaneously and allows for normal operation when left open or pulled high. As a fail-safe measure, primary-side logic failures force both outputs low.

The device accepts VDD supply voltages up to 25 V. A wide input VCCI range from 3 V to 18 V makes the driver suitable for interfacing with both analog and digital controllers. All the supply voltage pins have under voltage lock-out (UVLO) protection.

Hauptmerkmale

  • AEC-Q100 qualified with:
  • Device temperature grade 1
  • Device HBM ESD classification level H2
  • Device CDM ESD classification level C6
  • Functional Safety Quality-Managed
  • Documentation available to aid functional safety system design
  • Universal: dual low-side, dual high-side or half-bridge driver
  • Wide body SOIC-14 (DWK) package
  • 3.3-mm spacing between driver channels
  • Switching parameters:
  • 19-ns typical propagation delay
  • 10-ns minimum pulse width
  • 5-ns maximum delay matching
  • 6-ns maximum pulse-width distortion
  • Common-mode transient immunity (CMTI) greater than 100-V/ns
  • Isolation barrier life >40 years
  • 4-A peak source, 6-A peak sink output
  • TTL and CMOS compatible inputs
  • 3-V to 18-V input VCCI range
  • Up to 25-V VDD output drive supply
  • 8-V and 12-V VDD UVLO options
  • Programmable overlap and dead time
  • Rejects input pulses and noise transients shorter than 5 ns
  • Operating temperature range –40 to +125°C
  • Safety-related certifications:
  • 8000-V
  • PK
  • 5.7-kV
  • RMS
  • CSA certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 end equipment standards
  • CQC certification per GB4943.1-2011

Anwendung

  • Automotive: It can be found in automotive power electronics systems, such as motor drives, traction inverters, and battery management systems.
  • Industrial: In industrial drives, uninterruptible power supplies (UPS), and robotics for controlling high-power switches.
  • Renewable Energy: Used in solar inverters, wind turbine systems, and power converters for efficient energy conversion.
  • Motor Control: In motor control applications like electric vehicle drives and industrial motor drives.
  • Power Electronics: It is a critical component in power electronic converters, including DC-DC converters and DC-AC inverters.
  • Electric Vehicle (EV) and Hybrid Electric Vehicle (HEV) Systems: In the power electronics systems of electric and hybrid vehicles for efficient energy management and motor control.
  • Battery Management Systems: For managing the charging and discharging of batteries in various applications.
  • Grid-Tied Inverters: In grid-tied solar inverters for converting DC power from solar panels to AC power for the grid.

Spezifikationen

Category Integrated Circuits (ICs)Power Management (PMIC)Gate Drivers Series Automotive, AEC-Q100
Programmable Not Verified Driven Configuration Half-Bridge
Channel Type Independent Number of Drivers 2
Gate Type IGBT, N-Channel, P-Channel MOSFET Voltage - Supply 3V ~ 18V
Logic Voltage - VIL, VIH 1.2V, 1.6V Current - Peak Output (Source, Sink) 4A, 6A
Input Type CMOS/TTL Rise / Fall Time (Typ) 6ns, 7ns
Operating Temperature -40°C ~ 130°C (TJ) Mounting Type Surface Mount
Base Product Number UCC21530 Product Category Galvanically Isolated Gate Drivers
Type Half-Bridge Mounting Style SMD/SMT
Number of Outputs 2 Output Output Current 6 A
Supply Voltage - Min 3 V Supply Voltage - Max 18 V
Rise Time 6 ns Fall Time 7 ns
Minimum Operating Temperature - 40 C Maximum Operating Temperature + 125 C
Qualification AEC-Q100 Logic Type CMOS, TTL
Moisture Sensitive Yes Operating Supply Current 3 mA
Output Voltage 25 V Pd - Power Dissipation 1.81 W
Product Isolated Gate Drivers Product Type Galvanically Isolated Gate Drivers
Propagation Delay - Max 30 ns Rds On - Drain-Source Resistance 5 Ohms
Factory Pack Quantity 2000 Subcategory PMIC - Power Management ICs
Unit Weight 0.025013 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

payment Zahlung

Bezahlverfahren

hsbc
TT/Überweisung
paypal
Paypal
wu
Western Union
mg
Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]
Versand Versand & Verpackung

Versandart

fedex
Fedex
ups
UPS
dhl
DHL
tnt
NTN
Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie Garantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Bewertungen und Rezensionen

Mehr
J
J**b 01.24.2024

****** Seller highly recommended. ****** Excellent product, good quality, works as intended, fast delivery, carefully and professionally packaged, thank You! Friendly regards and best wishes _ Jack

7

Rezensionen

You need to log in to reply. Anmelden | Melden Sie sich an

In Stock: 7.295

Minimum Order: 1

Menge. Einzelpreis Ext. Preis
1+ - -

Die unten angegebenen Preise dienen nur als Referenz.