Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

ADG706BRU +BOM

CMOS, 2.5ohm Low-Voltage, 8-/16-Channel Multiplexers | IC MULTIPLEXER 16X1 28TSSOP

Hersteller:

ADI
Herstellerteil #:

ADG706BRU
Datenblatt:

ADG706BRU Datenblatt (PDF)
Pbfree Code:

No
Part Life Cycle Code:

Obsolete
Pin Count:

28
Reach Compliance Code:

not_compliant
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an ADG706BRU

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ADG706BRU Allgemeine Beschreibung

The ADG706 and ADG707 are low-voltage, CMOS analog multiplexers comprising 16 single channels and eight differential channels, respectively. The ADG706 switches one of 16 inputs (S1–S16) to a common output, D, as determined by the 4-bit binary address lines A0, A1, A2, and A3. The ADG707 switches one of eight differential inputs to a common differential output as determined by the 3-bit binary address lines A0, A1, and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG706 and ADG707 ideal for battery-powered, portable instruments. All channels exhibit break-before-make switching action preventing momentary shorting when switching channels. These devices are also designed to operate from a dual supply of ±2.5 V. These multiplexers are designed on an enhanced submicron process that provides low-power dissipation yet gives high switching speed, very low ON resistance, and leakage currents. ON resistance is in the region of a few ohms and is closely matched between switches and very flat over the full signal range. These parts can operate equally well as either multiplexers or demultiplexers and have an input signal range that extends to the supplies. The ADG706 and ADG707 are available in small 28-lead TSSOP packages. Product Highlights Single-/dual-supply operation. The ADG706 and ADG707 are fully specified and guaranteed with 3 V and 5 V single-supply and ±2.5 V dual-supply rails. Low ON resistance (2.5 Ω typical) Low-power consumption (<0.01 µW) Guaranteed break-before-make switching action Small 28-lead TSSOP package Applications Data acquisition systems Communication systems Relay replacement Audio and video switching Battery-powered systems

Spezifikationen

Source Content uid	ADG706BRU	Pbfree Code	No
Part Life Cycle Code	Obsolete	Pin Count	28
Reach Compliance Code	not_compliant	HTS Code	8542.39.00.01
Additional Feature	CAN ALSO OPERATE WITH SINGLE 3V OR SINGLE 5V SUPPLIES	Analog IC - Other Type	SPST
JESD-30 Code	R-PDSO-G28	JESD-609 Code	e0
Length	9.7 mm	Moisture Sensitivity Level	1
Neg Supply Voltage-Max (Vsup)	-2.75 V	Neg Supply Voltage-Min (Vsup)	-2.25 V
Neg Supply Voltage-Nom (Vsup)	-2.5 V	Number of Channels	16
Number of Functions	1	Number of Terminals	28
Off-state Isolation-Nom	80 dB	On-state Resistance Match-Nom	0.3 Ω
On-state Resistance-Max (Ron)	4.5 Ω	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	240
Qualification Status	Not Qualified	Seated Height-Max	1.1 mm
Signal Current-Max	0.03 A	Supply Current-Max (Isup)	0.001 mA
Supply Voltage-Max (Vsup)	2.75 V	Supply Voltage-Min (Vsup)	2.25 V
Supply Voltage-Nom (Vsup)	2.5 V	Surface Mount	YES
Switch-off Time-Max	26 ns	Switch-on Time-Max	50 ns
Switching	BREAK-BEFORE-MAKE	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	TIN LEAD
Terminal Form	GULL WING	Terminal Pitch	0.65 mm
Terminal Position	DUAL	Width	4.4 mm

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..