Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

BQ25713RSNR +BOM

I2C 1-4 cell NVDC Buck-Boost battery charge controller with USB type C PD support

Hersteller:

TI
Herstellerteil #:

BQ25713RSNR
Datenblatt:

BQ25713RSNR Datenblatt (PDF)
Number of series cells:

1, 2, 3, 4
Charge current (max) (A):

8.128
Vin (max) (V):

24
Cell chemistry:

Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH, SuperCap
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an BQ25713RSNR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

BQ25713RSNR Allgemeine Beschreibung

This device is a synchronous NVDC buck-boost battery charge controller, offering a low component count, high efficiency solution for space constrained, 1s-4s battery charging applications.

The NVDC configuration allows the system to be regulated at battery voltage, but not drop below system minimum voltage. The system keeps operating even when the battery is completely discharged or removed. When load power exceeds input source rating, the battery goes into supplement mode and prevents the system from crashing.

The BQ25713/BQ25713B charges battery from a wide range of input sources including USB adapter, high voltage USB PD sources and traditional adapters.

During power up, the charger sets converter to buck, boost or buck-boost configuration based on input source and battery conditions. The charger automatically transits among buck, boost and buck-boost configuration without host control.

In the absence of an input source, the BQ25713/BQ25713B supports USB On-the-Go (OTG) function from 1- to 4-cell battery to generate adjustable 3 V to 20.8 V on VBUS with 8 mV resolution. The OTG output voltage transition slew rate can be configurable, which is complied with the USB PD 3.0 PPS specifications.

When only battery powers the system and no external load is connected to the USB OTG port, the BQ25713/BQ25713B supports the Vmin Active Protection (VAP) feature, in which the device charges up the VBUS voltage from the battery to store some energy in the input decoupling capacitors. During the system peak power spike, the huge current drawing from the battery creates a larger voltage drop across the impedance from the battery to the system. The energy stored in the input capacitors will supplement the system, to prevent the system voltage from dropping below the minimum system voltage and causing the system crash. This Vmin Active Protection (VAP) is designed to absorb system power peaks during periods of SOC high power demand, which is highly recommended by Intel for the platforms with 1S~2S battery.

The BQ25713/BQ25713B monitors adapter current, battery current and system power. The flexibly programmed PROCHOT output goes directly to CPU for throttle back when needed.

Hauptmerkmale

Pin-to-pin and software compatible to BQ25703A
Charge 1s to 4s battery from wide range of input source
- 3.5-V to 24-V Input operating voltage
- Supports USB2.0, USB 3.0, USB 3.1 (Type C), and USB Power Delivery (USB-PD) input current settings
- Seamless transition among buck, buck-boost and boost operations
- Input current and voltage regulation (IDPM and VDPM) against source overload
Power/current monitor for CPU throttling
- Comprehensive PROCHOT profile, IMVP8/IMVP9 compliant
- Input and battery current monitor
- System power monitor, IMVP8/IMVP9 compliant
Narrow voltage DC (NVDC) power path management
- Instant-on with no battery or depleted battery
- Battery supplements system when adapter is fully-loaded
- Battery MOSFET ideal diode operation in supplement mode
Power up USB port from battery (USB OTG)
- 3-V to 20.8-V VOTG With 8-mV resolution
- Output current limit up to 6.4 A with 50-mA resolution
TI patented Pass Through Mode (PTM) for system power efficiency improvement and battery fast charging
When system is powered by battery only, Vmin Active Protection (VAP) mode supplements battery from input capacitors during system peak power spike
Input Current Optimizer (ICO) to extract max input power
800-kHz or 1.2-MHz Programmable switching frequency for 2.2-µH or 1.0-µH inductor
Host control interface for flexible system configuration
- I 2C Port optimal system performance and status reporting
- Hardware pin to set input current limit without EC control
Integrated ADC to monitor voltage, current and power
High accuracy for the regulation and monitor
- ±0.5% Charge voltage regulation
- ±2% Input/charge current regulation
- ±2% Input/charge current monitor
- ±4% Power monitor
Safety
- Thermal shutdown
- Input, system, battery overvoltage protection
- Input, MOSFET, inductor overcurrent protection
Safety-Related Certifications:
- IEC 62368-1 CB Certification
Low battery quiescent current
Package: 32-Pin 4 × 4 WQFN

Spezifikationen

Number of series cells	1, 2, 3, 4	Charge current (max) (A)	8.128
Vin (max) (V)	24	Cell chemistry	Lead Acid, Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, NiCd, NiMH, SuperCap
Battery charge voltage (min) (V)	1.024	Battery charge voltage (max) (V)	19.2
Absolute max Vin (max) (V)	30	Control topology	Switch-Mode Buck-boost
Control interface	I2C	Features	IC thermal regulation, ICO (Input Current Optimization), IINDPM (Input current limit), Input OVP, Integrated ADC, Power Path, Solar input/MPPT, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power)
Vin (min) (V)	3.5	Rating	Catalog
Operating temperature range (°C)	-40 to 85

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..