Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

DS1312+

Nonvolatile Controller with Lithium Battery Monitor

Hersteller:

Maxim Integrated
Herstellerteil #:

DS1312+
Datenblatt:

DS1312+ Datenblatt (PDF)
packingQty:

Tube,50
packingOption:

Tube
tempRange:

-40 to 85C
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an DS1312+

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DS1312+ Allgemeine Beschreibung

The DS1312 Nonvolatile Controller with Battery Monitor is a CMOS circuit which solves the application problem of converting CMOS RAM into nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a condition is detected, chip enable is inhibited to accomplish write protection and the battery is switched on to supply the RAM with uninterrupted power. Special circuitry uses a low-leakage CMOS process which affords precise voltage detection at extremely low battery consumption. In addition to battery-backup support, the DS1312 performs the important function of monitoring the remaining capacity of the lithium battery and providing a warning before the battery reaches end-of-life. Because the open-circuit voltage of a lithium backup battery remains relatively constant over the majority of its life, accurate battery monitoring requires loaded-battery voltage measurement. The DS1312 performs such measurement by periodically comparing the voltage of the battery as it supports an internal resistive load with a carefully selected reference voltage. If the battery voltage falls below the reference voltage under such conditions, the battery will soon reach end-of-life. As a result, the Battery Warning pin is activated to signal the need for battery replacement.

Hauptmerkmale

Converts CMOS SRAM into nonvolatile memory
Unconditionally write-protects SRAM when VCC is out of tolerance
Automatically switches to battery backup supply when VCC power failure occurs
Monitors voltage of a lithium cell and provides advanced warning of impending battery failure
Signals low-battery condition on active low
Battery Warning output signal
Optional 5% or 10% power-fail detection
Space-saving 8-pin DIP and SOIC packages
Optional 16-pin SOIC and 20-pin TSSOP versions reset processor when power failure occurs and hold processor in reset during system power-up
Industrial temperature range of -40°C to +85°C

Spezifikationen

model	DS1312+	packingQty	Tube,50
packingOption	Tube	lifeCycle	production
tempRange	-40 to 85C

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..