Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

DS1682S+T&R +BOM

Real Time Clock (RTC) IC Elapsed Time Counter 10B I2C, 2-Wire Serial 8-SOIC (0.154", 3.90mm Width)

Hersteller:

ADI
Herstellerteil #:

DS1682S+T&R
Datenblatt:

DS1682S+T&R Datenblatt (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Transferred
Pin Count:

8
Reach Compliance Code:

compliant
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an DS1682S+T&R

DS1682S+T&R Allgemeine Beschreibung

The DS1682 is an integrated elapsed-time recorder containing a factory-calibrated, temperature-compensated RC time base that eliminates the need for an external crystal. Using EEPROM technology to maintain data in the absence of power, the DS1682 requires no backup power source. The DS1682 detects and records the number of events on the EVENT pin and the total cumulative event time since the DS1682 was last reset to 0. The active-low ALARM pin alerts the user when the total time accumulated equals the user-programmed alarm value. The polarity of the open-drain active-low ALARM pin can be programmed to either drive low or to become high impedance upon an alarm condition. The DS1682 is ideal for applications that monitor the total amount of time that a device has been in operation and/or the number of uses since inception of service, repair, or the last calibration.

Hauptmerkmale

Records the Total Time that the Event Input has Been Active and the Number of Events that have Occurred
32-Bit, Nonvolatile, Elapsed Time Counter (ETC) Monitors Event Duration with Quarter-Second Resolution and Provides 34 Years of Total Time Accumulation
Programmable Elapsed Time Active-Low ALARM Output
Nonvolatile 17-Bit Event Counter Records the Total Number of Times an Event has Occurred
Calibrated, Temperature-Compensated RC Time Base Accurate to 2% Typical
10 Bytes of EEPROM User Memory
Write Disable Function to Prevent the Memory from Being Changed or Erased
2-Wire Serial Communication
Wide 2.5V to 5.5V Power-Supply Range
Useful in Time-of-Use Warranty, Calibration, Repair, and Maintenance Applications

Anwendung

Any System Where Time-of-Use is Important (Warranty Tracking)
High-Temp, Rugged, Industrial Applications Where Vibration or Shock Could Damage a Quartz Crystal

Spezifikationen

Pbfree Code	Yes	Part Life Cycle Code	Transferred
Pin Count	8	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Clock Frequency-Max	0.4 MHz	Information Access Method	SERIAL, 2-WIRE/I2C
Interrupt Capability	Y	JESD-30 Code	R-PDSO-G8
JESD-609 Code	e3	Length	4.9 mm
Moisture Sensitivity Level	1	Number of Terminals	8
Number of Timers		Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	260
Qualification Status	Not Qualified	Seated Height-Max	1.75 mm
Supply Voltage-Max	5.5 V	Supply Voltage-Min	2.5 V
Supply Voltage-Nom	3 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Finish	MATTE TIN	Terminal Form	GULL WING
Terminal Pitch	1.27 mm	Terminal Position	DUAL
Time-Min	SECONDS	Time@Peak Reflow Temperature-Max (s)	30
Volatile	NO	Width	3.9 mm
uPs/uCs/Peripheral ICs Type	TIMER, TIME RECORDER

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..