Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

DS80C410 +BOM

NetworkMicrocontrollerswithEthernetandCAN

Hersteller:

DALLAS
Herstellerteil #:

DS80C410
Datenblatt:

DS80C410 Datenblatt (PDF)
Paket/Koffer:

LQFP100
RoHS:
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an DS80C410

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DS80C410 Allgemeine Beschreibung

GENERAL DESCRIPTIONThe DS80C410/DS80C411 network microcontrollers offer the highest integration available in an 8051 device. Peripherals include a 10/100 Ethernet MAC, three serial ports, an optional CAN 2.0B controller, 1-Wire® Master, and 64 I/O pins. The DS80C410 and DS80C411 also include 64kBytes internal SRAM for user application storage and network stack.FEATURES■ High-Performance Architecture Single 8051 Instruction Cycle in 54ns DC to 75MHz Clock Rate Flat 16MB Address Space Four Data Pointers with Auto-Increment/ Decrement and Select-Accelerate Data Movement 16/32-Bit Math Accelerator■ Multitiered Networking and I/O 10/100 Ethernet Media Access Controller (MAC) Optional CAN 2.0B Controller 1-Wire Net Controller Three Full-Duplex Hardware Serial Ports Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)■ Robust ROM Firmware Supports Network Boot Over Ethernet Using DHCP and TFTP Full, Application-Accessible TCP/IP Network Stack Supports IPv4 and IPv6 Implements UDP, TCP, DHCP, ICMP, and IGMP Preemptive, Priority-Based Task Scheduler MAC Address can Optionally be Acquired from IEEE Registered DS2502-E48■ 10/100 Ethernet Mac Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC (10Mbps) Interfaces Allow Selection of PHY Low-Power Operation Ultra-Low-Power Sleep Mode with Magic Packet® and Wake-Up Frame Detection 8kB On-Chip Tx/Rx Packet Data Memory with Buffer Control Unit Reduces Load on CPU Half- or Full-Duplex Operation with Flow Control Multicast/Broadcast Address Filtering with VLAN SupportAPPLICATIONS Industrial Control/Automation Environmental Monitoring Network Sensors Vending Home/Office Automation Transaction/Payment Terminals Data Converters (Serial-to-Ethernet, CAN-toEthernet) Remote Data-Collection Equipment

Hauptmerkmale

High-Performance Architecture
Single 8051 Instruction Cycle in 54ns
DC to 75MHz Clock Rate
Flat 16MB Address Space
Four Data Pointers with Auto-Increment/
Decrement and Select-Accelerate Data Movement
16/32-Bit Math Accelerator
Multitiered Networking and I/O
10/100 Ethernet Media Access Controller (MAC)
Optional CAN 2.0B Controller
1-Wire Net Controller
Three Full-Duplex Hardware Serial Ports
Up to Eight Bidirectional 8-Bit Ports (64 Digital I/O Pins)
Robust ROM Firmware
Supports Network Boot Over Ethernet Using DHCP and TFTP
Full, Application-Accessible TCP/IP Network Stack
Supports IPv4 and IPv6
Implements UDP, TCP, DHCP, ICMP, and IGMP
Preemptive, Priority-Based Task Scheduler
MAC Address can Optionally be Acquired from IEEE Registered DS2502-E48
10/100 Ethernet Mac
Flexible IEEE 802.3 MII (10/100Mbps) and ENDEC
(10Mbps) Interfaces Allow Selection of PHY
Low-Power Operation
Ultra-Low-Power Sleep Mode with Magic Packet®
and Wake-Up Frame Detection
8kB On-Chip Tx/Rx Packet Data Memory with Buffer
Control Unit Reduces Load on CPU
Half- or Full-Duplex Operation with Flow Control
Multicast/Broadcast Address Filtering with VLAN Support

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..