Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

FOD3182 +BOM

3A Gate Driver Optical Coupling 5000Vrms 1 Channel 8-DIP

Hersteller:

ON Semiconductor, LLC
Herstellerteil #:

FOD3182
Datenblatt:

FOD3182 Datenblatt (PDF)
Case Outline:

709AC
MSL Temp (°C):

260
Container Type:

BLKBG
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an FOD3182

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FOD3182 Allgemeine Beschreibung

The FOD3182 is a 3A output current, high-speed MOSFET gate drive optocoupler. It consists of an aluminium gallium arsenide (AlGaAs) light emitting diode (LED) optically coupled to a CMOS detector with PMOS and NMOS output power transistors integrated circuit power stage. It is ideally suited for high frequency driving of power MOSFETS used in Plasma Display Panels (PDPs), motor control inverter applications, and high performance DC-DC converters.
The device is packaged in an 8-pin dual in-line housing compatible with 260°C reflow processes for lead free solder compliance.

Hauptmerkmale

High noise immunity characterized by 50kV/µs (Typical) common mode rejection
Guaranteed operating temperature range of -40°C to 100°C
3A minimum peak output current
Fast switching speed
210ns max. propagation delay
65ns max. pulse width distortion
Fast output rise/fall time
Offers lower dynamic power dissipation
250kHZ maximum switching speed
Wide Vcc operating range from 10V to 30V
Use of P-Channel MOSFETs at output stage enables output voltage swing close to the supply rail (rail-to-rail output)
5,000V_rms, 1 minute isolation
Under voltage lockout protection (UVLO) with hysteresis - optimized for driving MOSFETs
Minimum creepage distance of 8.0mm
Minimum insulation thickness of 0.5mm
Minimum clearance distance of 10.0mm to 16mm (Option TV or TSV)
1,414 peak working insulation voltage (V_IORM)
UL and VDE (requires 'V' ordering option) approved

Anwendung

AC-DC Merchant Power Supply
Energy Generation & Distribution
Industrial Motor
Uninterruptible Power Supply

Spezifikationen

Status	Active	Case Outline	709AC
MSL Temp (°C)	260	Container Type	BLKBG

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie

365-Tage-Produkt

Qualitätsgarantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Bewertungen und Rezensionen

Mehr

A**n 12.12.2020

Just came in a simple envelope but everything is ok and working . This is going to be a component tester so will see how it goes!

L**n 10.13.2020

Quality soldering average. Idle voltage 8.96 v. The voltage with 350ma load is 8.94 v. There is no strong heating. Happy with the work.

L**s 09.20.2020

A good designer for beginners. Everything is perfectly soldered and going. Gives out voltage from 1.2 v to 12,5-13 v. But, of course, the serious power supply does not pull, because. No voltage stabilization. Nevertheless, the manufacturer and seller thank you very much for such sets.

S**n 02.22.2020

Seller good service.