Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

MSC8156VT1000B +BOM

Advanced microcontroller for efficient execution of complex algorithms and data processing tasks

Hersteller:

NXP Semiconductor
Herstellerteil #:

MSC8156VT1000B
Datenblatt:

MSC8156VT1000B Datenblatt (PDF)
Product:

DSPs
Series:

MSC8156E
Tradename:

StarCore
Mounting Style:

SMD/SMT
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an MSC8156VT1000B

MSC8156VT1000B Allgemeine Beschreibung

The MSC8156 is based on the industry's highest-performance DSP core built on StarCore® technology and designed for the advanced processing requirements and capabilities of today's high-performance applications for the wireless broadband, medical imaging, aerospace, defense and advanced test and measurement markets. It delivers industry-leading performance and power savings, leveraging 45 nm process technology in a highly integrated system-on-chip (SoC) to provide performance equivalent to a 6 GHz single-core device. The MSC8156 helps equipment manufacturers create end products and services that integrate more functionality in a smaller hardware footprint.

The MSC8156 DSP delivers a high level of performance and integration, combining six fully programmable enhanced SC3850 DSP cores, each running at up to 1 GHz. Developed by NXP® and integrated on-chip, the MAPLE-B accelerator supports hardware acceleration for Turbo and Viterbi channel decoding and for DFT/iDFT and FFT/iFFT algorithms. A high-performance internal RISC-based QUICC Engine® subsystem supports multiple networking protocols to guarantee reliable data transport over packet networks while significantly offloading processing from the DSP cores.

The MSC8156 embeds large internal memory and supports a variety of advanced high-speed interface types, including two RapidIO® interfaces, two gigabit Ethernet interfaces for network communications, a PCI Express® controller, two DDR controllers for high-speed, industry standard memory interface and four multi-channel TDM interfaces. The MSC8156 allows a high degree of scalability through pin compatibility with all MSC825x and MSC815x DSP devices.

Hauptmerkmale

Six StarCore® DSP SC3850 core subsystems each with:
SC3850 DSP core at up to 1 GHz
512 KB unified L2 cache/M2 memory
32 KB I-cache, 32 KB D-cache
Fully programmable 1056 KB M3 shared memory (SRAM)
MAPLE-B - highly flexible programmable Turbo and Viterbi decoder supports configurable decoding parameters. It can perform up to 200 Mbps of Turbo decoding (six iterations) or up to 115 Mbps of K = 9 (zero tail) Viterbi decoding
Two DDR 2/3 64-bit SDRAM interfaces at up to 800 MHz data rate
Chip-Level Arbitration and Switching Fabric, non-blocking, fully pipelined, low latency
High-speed interconnects:
Dual 4x/1x Serial RapidIO at 1.25/2.5/3.125 Gbaud
PCI Express 4x/1x
Two SGMII
Dual RISC QUICC Engine® supporting:
RGMII gigabit Ethernet ports
Serial peripheral interface (SPI)
TDM highway 1024 ch., 400 Mbps, divided into four ports of 256
DMA engine 16 bi-directional channels
Other peripheral interfaces:
UART
I²C
32 GPIO
16 timers
Technology
Process: 45 nm SOI
Voltage: 1-volt core, 2.5, 1.8/1.5-volt I/O
Package: FC-BPGA (29x29) 1 mm pitch, RoHS
This product is included in NXP®.s product longevity program, with assured supply for a minimum of 10 years after launch

Spezifikationen

Product Category:	Digital Signal Processors & Controllers - DSP, DSC	Product:	DSPs
Series:	MSC8156E	Tradename:	StarCore
Mounting Style:	SMD/SMT	Core:	SC3850
Number of Cores:	6 Core	Maximum Clock Frequency:	1 GHz
L1 Cache Instruction Memory:	6 x 32 kB	L1 Cache Data Memory:	6 x 32 kB
Program Memory Size:	-	Data RAM Size:	-
Operating Supply Voltage:	1 V	Minimum Operating Temperature:	0 C
Maximum Operating Temperature:	+ 90 C	Packaging:	Tray
Data Bus Width:	32 bit, 64 bit	Data ROM Size:	96 kB
I/O Voltage:	2.5 V	Interface Type:	I2C, JTAG, SPI
Moisture Sensitive:	Yes	Number of Timers/Counters:	18 Timer
Processor Series:	StarCore	Product Type:	DSP - Digital Signal Processors & Controllers
Factory Pack Quantity:	1	Subcategory:	Embedded Processors & Controllers
Supply Voltage - Max:	1.05 V	Supply Voltage - Min:	970 mV
Watchdog Timers:	Watchdog Timer	Unit Weight:	0.393340 oz

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..