Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

NUC123SD4AN0 +BOM

Cutting-edge microcontroller with a 72MHz Cortex-M0 CPU, designed for a wide range of applications in the electronics industry

Hersteller:

Nuvoton Technology Corporation
Herstellerteil #:

NUC123SD4AN0
Datenblatt:

NUC123SD4AN0 Datenblatt (PDF)
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
HTS Code:

8542.31.00.01
Has ADC:

YES

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

NUC123SD4AN0 Allgemeine Beschreibung

The NUC123SD4AN0 microcontroller unit, developed by Nuvoton Technology Corporation, stands out as a versatile and capable MCU within the NUC123 series. Sporting a 32-bit ARM Cortex-M0 core operating at up to 72 MHz, this MCU offers a rich set of peripherals including timers, UART, SPI, I2C, and GPIOs, catering to a wide range of embedded applications. With support for up to 64 KB of flash memory and 8 KB of SRAM, the NUC123SD4AN0 provides ample storage for program code and data handling. Moreover, its advanced features like a high-precision 12-bit ADC for precise analog signal processing and various communication interfaces for seamless connectivity make it a favorable choice for applications requiring accurate measurements and efficient data exchange. Whether in consumer electronics, industrial automation, or IoT deployments, the NUC123SD4AN0 is a dependable and cost-effective solution for energy-efficient embedded system designs

Hauptmerkmale

STM32 microcontroller with LQFP64 package
Two types of extension resources
– Arduino Uno Revision 3 connectivity
– STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
mbed-enabled (
http://mbed.org
On-board ST-LINK/V2-1 debugger/programmer with SWD connector
– selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Flexible board power supply
– USB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
– Power management access point  Three LEDs
– USB communication (LD1), user LED (LD2), power LED (LD3)
Two push buttons: USER and RESET
USB re-enumeration capability: three different interfaces supported on USB
– Virtual Com port
– Mass storage
– Debug port
Supported by wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs

Spezifikationen

Part Life Cycle Code	Active	Reach Compliance Code	compliant
HTS Code	8542.31.00.01	Has ADC	YES
Address Bus Width		Bit Size	32
CPU Family	CORTEX-M0	Clock Frequency-Max	24 MHz
DAC Channels	NO	DMA Channels	YES
External Data Bus Width		JESD-30 Code	S-PQFP-G64
Length	7 mm	Number of I/O Lines	47
Number of Terminals	64	On Chip Program ROM Width	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	YES	Peak Reflow Temperature (Cel)	NOT SPECIFIED
Qualification Status	Not Qualified	RAM (bytes)	20480
ROM (words)	69632	ROM Programmability	FLASH
Speed	72 MHz	Supply Voltage-Max	5 V
Supply Voltage-Min	2.5 V	Supply Voltage-Nom	3.3 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Form	GULL WING
Terminal Pitch	0.4 mm	Terminal Position	QUAD
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Width	7 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC	Series	NuMicro™ NUC123
Programmabe	Not Verified	Core Processor	ARM® Cortex®-M0
Core Size	32-Bit Single-Core	Connectivity	I²C, IrDA, SPI, UART/USART, USB
Peripherals	Brown-out Detect/Reset, DMA, I²S, LVD, POR, PS2, PWM, WDT	Number of I/O	47
Program Memory Size	68KB (68K x 8)	Program Memory Type	FLASH
EEPROM Size	-	RAM Size	20K x 8
Voltage - Supply (Vcc/Vdd)	2.5V ~ 5.5V	Data Converters	A/D 8x10b
Oscillator Type	Internal	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	NUC123

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..