Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

NUC131LD2AE +BOM

48-pin Quad Flat Package design

Hersteller:

Nuvoton Technology Corporation
Herstellerteil #:

NUC131LD2AE
Datenblatt:

NUC131LD2AE Datenblatt (PDF)
Programmabe:

Not Verified
Core Processor:

ARM® Cortex®-M0
Core Size:

32-Bit Single-Core
Speed:

50MHz
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an NUC131LD2AE

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

NUC131LD2AE Allgemeine Beschreibung

The NUC131LD2AE microcontroller, part of Nuvoton Technology Corporation's NUC131 series, stands out with its Arm Cortex-M0 core capable of running at speeds of up to 50 MHz, accompanied by 128 KB of flash memory and 16 KB of SRAM. Its extensive selection of communication interfaces including UART, SPI, I2C, and GPIO makes it a versatile solution for various embedded applications. With support for operating voltages ranging from 2.5V to 5.5V and low power consumption, the NUC131LD2AE is an optimal choice for battery-powered devices. Moreover, it boasts a rich assortment of analog peripherals such as ADC, PWM, and comparators, further enhancing its suitability for sensor interfacing and other analog applications

Hauptmerkmale

STM32 microcontroller with LQFP64 package
Two types of extension resources
– Arduino Uno Revision 3 connectivity
– STMicroelectronics Morpho extension pin headers for full access to all STM32 I/Os
mbed-enabled (
http://mbed.org
On-board ST-LINK/V2-1 debugger/programmer with SWD connector
– selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Flexible board power supply
– USB VBUS or external source (3.3 V, 5 V, 7 - 12 V)
– Power management access point  Three LEDs
– USB communication (LD1), user LED (LD2), power LED (LD3)
Two push buttons: USER and RESET
USB re-enumeration capability: three different interfaces supported on USB
– Virtual Com port
– Mass storage
– Debug port
Supported by wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs

Spezifikationen

Programmabe	Not Verified	Core Processor	ARM® Cortex®-M0
Core Size	32-Bit Single-Core	Speed	50MHz
Connectivity	CANbus, I²C, IrDA, LINbus, SPI, UART/USART	Peripherals	Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number of I/O	42	Program Memory Size	68KB (68K x 8)
Program Memory Type	FLASH	EEPROM Size	-
RAM Size	8K x 8	Voltage - Supply (Vcc/Vdd)	2.5V ~ 5.5V
Data Converters	A/D 8x12b	Oscillator Type	Internal
Operating Temperature	-40°C ~ 105°C (TA)	Mounting Type	Surface Mount

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..