Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Privacy Policy.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

PCA9539DW

ROHS compliant I/O expander with PCA9539DW configuration

Hersteller:

Texas Instruments
Herstellerteil #:

PCA9539DW
Datenblatt:

PCA9539DW Datenblatt (PDF)
Number of I/Os:

16
Features:

Configuration registers, Interrupt pin, Reset pin
Supply voltage (min) (V):

2.3
Supply voltage (max) (V):

5.5
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an PCA9539DW

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PCA9539DW Allgemeine Beschreibung

The system master can reset the PCA9539 in the event of a time-out or other improper operation by asserting a low in the RESET input. The power-on reset puts the registers in their default state and initializes the I²C/SMBus state machine. Asserting RESET causes the same reset/initialization to occur without de-powering the part.

The PCA9539 open-drain interrupt ( INT) output is activated when any input state differs from its corresponding Input Port register state and is used to indicate to the system master that an input state has changed.

INT can be connected to the interrupt input of a microcontroller. By sending an interrupt signal on this line, the remote I/O can inform the microcontroller if there is incoming data on its ports without having to communicate via the I²C bus. Thus, the PCA9539 can remain a simple slave device.

The device outputs (latched) have high-current drive capability for directly driving LEDs. The device has low current consumption.

The PCA9539 is identical to the PCA9555, except for the removal of the internal I/O pullup resistor, which greatly reduces power consumption when the I/Os are held low, replacement of A2 with RESET, and a different address range.

Two hardware pins (A0 and A1) are used to program and vary the fixed I²C address and allow up to four devices to share the same I²C bus or SMBus.

Hauptmerkmale

Low standby-current consumption of 1 µA max
I²C to Parallel port expander
Open-drain active-low interrupt output
Active-low reset input
5-V Tolerant I/O ports
Compatible with most microcontrollers
400-kHz Fast I²C Bus
Polarity inversion register
Address by two hardware address pins for use of up to four devices
Latched outputs with high-current drive capability for directly driving LEDs
Latch-up performance exceeds 100 mA Per JESD 78, class II
ESD protection exceeds JESD 22
- 2000-V Human-body model (A114-A)
- 1000-V Charged-device model (C101)

Spezifikationen

Number of I/Os	16	Features	Configuration registers, Interrupt pin, Reset pin
Supply voltage (min) (V)	2.3	Supply voltage (max) (V)	5.5
Addresses	4	Rating	Catalog
Frequency (max) (MHz)	0.4	Operating temperature range (°C)	-40 to 85

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..