Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

RTD2261 +BOM

Hersteller:

REALTEK
Herstellerteil #:

RTD2261
Datenblatt:

RTD2261 Datenblatt (PDF)
Paket/Koffer:

QFP128
Produktart:

Embedded Processors & Controllers
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an RTD2261

RTD2261 Allgemeine Beschreibung

[Realtek]FeaturesGeneral● Embedded DDC with DDC1/2B/CI● Embedded one MCU with SPI flash controller.● Require only one crystal to generate all timing.● Programmable internal low-voltage-reset (LVR)● High resolution 6 channels PWM output, and wide range selectable PWM frequency.● Support input format up to FHD● Embedded BJT control circuit for 1.2V regulator replacementAnalog RGB Input Interface● One Analog input supported● Integrated 8-bit triple-channel 210MHz ADC/PLL(option)● Embedded programmable Schmitt trigger of HSYNC● Support Sync-On-Green (SOG) and various kinds of composite sync modes● On-chip high-performance hybrid PLLs● High resolution true 64 phase ADC PLLEmbedded MCU● Industrial standard 8051 core with external serial flash● Low speed ADC for various application● I2C Master or Slave hardware supportedAuto Detection /Auto Calibration● Input format detection● Compatibility with standard VESA mode and support user-defined mode● Smart engine for Phase/Image position/Color calibrationScaling● Fully programmable zoom ratios● Independent horizontal/vertical scaling● Advanced zoom algorithm provides high image quality● Sharpness/Smooth filter enhancement● Support non-linear scaling from 4:3 to 16:9 or 16:9 to 4:3Color Processor● True 10 bits color processing engine● sRGB compliance● Advanced dithering logic for 18-bit panel color depth enhancement● Brightness and contrast control● Programmable 10-bit gamma support● Peaking/Coring function for video sharpnessVividColor™● Independent color management (ICM)● Dynamic contrast control (DCC)Output Interface● Fully programmable display timing generator● Flexible data pair swapping for easier system design.● Single or Dual display interface supported up to 186MHz, FHD resolution● LVDS output interface● Support 8 bits LVDS output● Spread-Spectrum DPLL to reduce EMI● Fixed Last Line output for perfect panel capabilityEmbedded OSD● Embedded 16.5K SRAM dynamically stores OSD command and fonts● Support multi-color RAM font, 1, 2 and 4-bit per pixel● 64 color palette● Maximum 10 window with alpha-blending/ gradient / gradient target color / gradient reversed color/ dynamic fade-in/fade-out, bordering/ shadow/3D window type● Rotary 90,180,270 degree● Independent row shadowing/bordering● Programmable blinking effects for each character● OSD-made internal pattern generator for factory mode● Support 12x18~4x18 proportional font● Hardware decompression for OSD font● Special function for closed-caption● Support 2 independent font basePower & Package● 3.3V / 1.2V power supply● 64 pin LQFP 7x7 package

Hauptmerkmale

General
Embedded DDC with DDC1/2B/CI
Embedded one MCU with SPI flash controller.
Require only one crystal to generate all timing.
Programmable internal low-voltage-reset (LVR)
High resolution 6 channels PWM output, and wide range selectable PWM frequency.
Support input format up to FHD
Embedded BJT control circuit for 1.2V regulator replacement
Analog RGB Input Interface
One Analog input supported
Integrated 8-bit triple-channel 210MHz ADC/PLL(option)
Embedded programmable Schmitt trigger of HSYNC
Support Sync-On-Green (SOG) and various kinds of composite sync modes
On-chip high-performance hybrid PLLs
High resolution true 64 phase ADC PLL
Embedded MCU
Industrial standard 8051 core with external serial flash

Spezifikationen

Product Category

IC Chips

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..