Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

SA30CA +BOM

48.4V Clamp 10.5A Ipp Tvs Diode Through Hole DO-204AC (DO-15)

Hersteller:

Littelfuse Inc
Herstellerteil #:

SA30CA
Datenblatt:

SA30CA Datenblatt (PDF)
Series:

SA
Type:

Zener
Bidirectional Channels:

1
Voltage - Reverse Standoff (Typ):

30V
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an SA30CA

SA30CA Allgemeine Beschreibung

The SA Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.Halogen-Free and RoHS compliantTypical maximum temperature coefficient ΔVBR= 0.1% Ã— VBR@25Â°CGlass passivated junction500W peak pulse capability at 10Ã—1000Î¼s waveform, repetition rate (duty cycles):0.01%Fast response time: typically less than 1.0ps from 0 Volts to BV minExcellent clamping capabilityLow incremental surge resistanceTypical IR less than 1Î¼A above 13VHigh temperature soldering guaranteed: 265Â°C./10 seconds/ 0.375â€,(9.5mm) lead length, 51bs., (2.3kg) tensionPlastic package has Underwriters LaboratoryFlammability classification 94V-OMatte Tin Leadâ€“free plated

Hauptmerkmale

Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C × ΔT
Glass passivated chip junction in DO-15 Package
500W peak pulse capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact).
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
Typical IR less than 1μA above 13V
High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg) tension
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant

Anwendung

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

Spezifikationen

Category	Circuit ProtectionTransient Voltage Suppressors (TVS)TVS Diodes	Series	SA
Type	Zener	Bidirectional Channels	1
Voltage - Reverse Standoff (Typ)	30V	Voltage - Breakdown (Min)	33.3V
Voltage - Clamping (Max) @ Ipp	48.4V	Current - Peak Pulse (10/1000µs)	10.5A
Power - Peak Pulse	500W	Power Line Protection	No
Applications	General Purpose	Capacitance @ Frequency	-
Operating Temperature	-55°C ~ 175°C (TJ)	Mounting Type	Through Hole

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..