Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

SA5.0A +BOM

57A 500W 9.2V 6.4V 5V DO-204AC(DO-15) Electrostatic and Surge Protection (TVS/ESD) ROHS

Hersteller:

Littelfuse
Herstellerteil #:

SA5.0A
Datenblatt:

SA5.0A Datenblatt (PDF)
Reverse Standoff Voltage (VR) (Vso):

5
Watts (W):

500
Peak Pulse Current (Ipp) 10x1000 (A):

55.4
Breakdown Voltage (MIN VBR@IT ) (V):

6.4
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an SA5.0A

SA5.0A Allgemeine Beschreibung

Ensure peace of mind for your electronic equipment with the advanced protection of the SA5.0A from the SA Series. This product is specifically engineered to shield sensitive electronics from voltage transients induced by lightning strikes and other transient voltage events. It is Halogen-Free and RoHS compliant, meeting the highest environmental standards. With a glass passivated junction and a 500W peak pulse capability, it can handle surges with ease. The fast response time of less than 1.0ps ensures quick protection for your equipment. The SA5.0A also offers excellent clamping capability, low incremental surge resistance, and high temperature soldering guaranteed at 265°C for 10 seconds. The plastic package is UL Flammability classification 94V-0 and Matte Tin Lead-free plated, making it a reliable choice for your electronic protection needs

Hauptmerkmale

Typical maximum temperature coefficient ΔVBR = 0.1% × VBR@25°C × ΔT
Glass passivated chip junction in DO-15 Package
500W peak pulse capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Typical failure mode is short from over-specified voltage or current
Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact).
ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
Low incremental surge resistance
Typical IR less than 1μA above 13V
High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead
length, 5 lbs., (2.3kg) tension
Plastic package has underwriters laboratory flammability classification 94V-O
Matte tin lead–free plated
Halogen free and RoHS compliant

Anwendung

TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

Spezifikationen

Reverse Standoff Voltage (VR) (Vso)	5	Watts (W)	500
Peak Pulse Current (Ipp) 10x1000 (A)	55.4	Breakdown Voltage (MIN VBR@IT ) (V)	6.4
Breakdown Voltage (VBR@IT) (V)	7	Ir @Vso( μA)	600
On-State Current (IT) (mA)	10	Max Clamp Voltage (Vc) (V)	9.2
Operating Temperature Maximum Celsius	175	Polarity	Unipolar

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..