Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

TXB0104QPWRQ1 +BOM

00Mbps Data Rate

Hersteller:

Texas Instruments
Herstellerteil #:

TXB0104QPWRQ1
Datenblatt:

TXB0104QPWRQ1 Datenblatt (PDF)
Series:

Automotive, AEC-Q100
Translator Type:

Voltage Level
Channel Type:

Bidirectional
Number Of Circuits:

1
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an TXB0104QPWRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TXB0104QPWRQ1 Allgemeine Beschreibung

Voltage-level translators address the challenges posed by simultaneous use of different supply-voltage levels on the same circuit board. This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track V_CCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track V_CCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. V_CCA should not exceed V_CCB.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

The TXB0104 is designed so that the OE input circuit is supplied by V_CCA.

This device is fully specified for partial-power-down applications using I_off. The I_off circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

Hauptmerkmale

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results
- Device Temperature Grade 1: –40°C to +125°C
  Ambient Operating Temperature Range
1.2 V to 3.6 V on A Port and 1.65 V to 5.5 V on B Port
(V_CCA ≤ V_CCB)
V_CC Isolation Feature – If Either V_CC
Input is at GND, All Outputs are in the High-Impedance State
OE Input Circuit Referenced to V_CCA
I_off Supports Partial-Power-Down Mode Operation
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- A port
  - ±2500-V Human-Body Model (A114-B)
  - ±1000-V Charged-Device Model (C101)
- B port
  - ±15000-V Human-Body Model (A114-B)
  - ±1000-V Charged-Device Model (C101)

Anwendung

Microcontroller and Sensor Interfaces: Interfacing between microcontrollers and sensors or peripheral devices that operate at different voltage levels.
Mixed Voltage Systems: Bridging voltage domains in mixed-voltage systems to enable communication and data exchange.
Battery-Powered Devices: Extending battery life by allowing components to operate at lower voltage levels when possible.
I2C and SPI Communication: Facilitating communication between devices with different voltage requirements using standard serial communication protocols.
Automotive Electronics: Supporting communication between different subsystems and components in automotive applications, which often have varied voltage requirements.
Industrial Control: Enabling interoperability between sensors, controllers, and actuators in industrial automation systems.
Consumer Electronics: Supporting voltage translation between various components in consumer electronic devices.

Spezifikationen

Category	Integrated Circuits (ICs)LogicTranslators, Level Shifters	Series	Automotive, AEC-Q100
Translator Type	Voltage Level	Channel Type	Bidirectional
Number of Circuits	1	Channels per Circuit	4
Voltage - VCCA	1.2 V ~ 3.6 V	Voltage - VCCB	1.65 V ~ 5.5 V
Input Signal	-	Output Signal	-
Output Type	Tri-State, Non-Inverted	Data Rate	100Mbps
Operating Temperature	-40°C ~ 125°C (TA)	Features	Auto-Direction Sensing
Mounting Type	Surface Mount	Base Product Number	TXB0104

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie

365-Tage-Produkt

Qualitätsgarantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Bewertungen und Rezensionen

Mehr

D**N 05.22.2023

Good quality spares and service ,thanks

J**n 11.14.2021

Voltage adjusts, en pin never understood for what. It says there is a signal output but i did not find anything there by an oscillator. I found some datasheet, there is a synchronization input, but the leg is not the one). The seller did not answer the question.