Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

TXS0104ERGYR +BOM

The TXS0104ERGYR is a versatile component that can translate and shift levels efficiently

Hersteller:

Texas Instruments
Herstellerteil #:

TXS0104ERGYR
Datenblatt:

TXS0104ERGYR Datenblatt (PDF)
Translator Type:

Voltage Level
Channel Type:

Bidirectional
Number Of Circuits:

1
Channels Per Circuit:

4
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an TXS0104ERGYR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TXS0104ERGYR Allgemeine Beschreibung

This 4-bit non-inverting translator uses two separate configurable power-supply rails.The A port is designed to track VCCA. VCCA acceptsany supply voltage from 1.65 V to 3.6 V. VCCA must be less than or equal toVCCB. The B port is designed to track VCCB.VCCB accepts any supply voltage from 2.3 V to 5.5 V. This allows forlow-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltagenodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedancestate.

The TXS0104E is designed so that the OE input circuit is supplied byVCCA.

To ensure the high-impedance state during power up or power down, OE should be tied toGND through a pulldown resistor; the minimum value of the resistor is determined by thecurrent-sourcing capability of the driver.

Hauptmerkmale

No Direction-Control Signal Needed
Max Data Rates
- 24 Mbps (Push Pull)
- 2 Mbps (Open Drain)
Available in the Texas Instruments NanoFree?Package
1.65 V to 3.6 V on A port and 2.3 V to 5.5 V on B port (VCCA≤ VCCB)
No Power-Supply Sequencing Required – VCCA orVCCB Can Be Ramped First
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection Exceeds JESD 22
- A Port
  - 2000-V Human-Body Model (A114-B)
  - 200-V Machine Model (A115-A)
  - 1000-V Charged-Device Model (C101)
- B Port
  - 15-kV Human-Body Model (A114-B)
  - 200-V Machine Model (A115-A)
  - 1000-V Charged-Device Model (C101)
IEC 61000-4-2 ESD (B Port)
- ±8-kV Contact Discharge
- ±10-kV Air-Gap Discharge

Spezifikationen

Category	Integrated Circuits (ICs)LogicTranslators, Level Shifters	Series	-
Translator Type	Voltage Level	Channel Type	Bidirectional
Number of Circuits	1	Channels per Circuit	4
Voltage - VCCA	1.65 V ~ 3.6 V	Voltage - VCCB	2.3 V ~ 5.5 V
Input Signal	-	Output Signal	-
Output Type	Open Drain, Push-Pull	Data Rate	24Mbps
Operating Temperature	-40°C ~ 85°C (TA)	Features	Auto-Direction Sensing
Mounting Type	Surface Mount	Base Product Number	TXS0104

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..

Garantie

365-Tage-Produkt

Qualitätsgarantie

Wir versprechen, 365 Tage Qualitätssicherung für alle unsere Produkte zu bieten.

Bewertungen und Rezensionen

Mehr

B**n 11.11.2023

Corresponds completely. I recommend

G**D 02.13.2023

very good parts, i will buy again, thanks!

D**o 07.12.2021

In belarus in brest region the payments came in 33 days, in general the view was executed qualitatively, but on one board on the back side there was a small scratch, i hope, the work will not affect.

H**r 09.26.2020

Can receive. Called Money gotten back.