Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AFE44I31YZR +BOM

Ultra-low-power integrated analog front end (AFE) for wearable optical biosensing with FIFO and I2C

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

AFE44I31YZR
Datenblatt:

AFE44I31YZR Datenblatt (PDF)
Applications:

HRV, Hearables, Optical-HRM, SpO2, Vo2 max
Number Of Input Channels:

4
Resolution (Bits):

22
Number Of LEDs:

6
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AFE44I31YZR

AFE44I31YZR Allgemeine Beschreibung

For those in need of a sophisticated analog front-end solution for optical bio-sensing tasks, the AFE44I30 offers a comprehensive set of features to meet diverse application requirements. From heart-rate monitoring to SpO2 measurements, this versatile device can accommodate up to six LEDs and four photodiodes, providing ample opportunities for customization. The transimpedance amplifier plays a crucial role in converting photodiode current into voltage, while the ADC enables precise digitalization of the signal. With a 128-sample FIFO block and I2C interface, data processing and retrieval become seamless and efficient. Additionally, the integrated LED driver with 8-bit current control ensures consistent illumination levels for accurate sensing. With its high dynamic range circuitry, the AFE44I30 excels in capturing even the smallest signal variations, making it an ideal choice for demanding bio-sensing applications

Hauptmerkmale

Supports signal acquisition of up to 24 phases
Flexible allocation of 6 LED, 4 PD in each phase
Simultaneous signal acquisition from different sensors at different data rates
Accurate, continuous heart-rate monitoring:
- System SNR up to 108-dB at 16 µA PD current
- Low current for continuous operation on a wearable device with a typical value: 15 µA for an LED, 20 µA for the receiver
Transmitter:
- Supports common anode LED configuration
- 8-Bit programmable LED current with range adjustable from 25 mA to 250 mA
- Mode to fire two LEDs in parallel with independent per-phase current control
- Programmable LED on-time per-phase
- Simultaneous support of 6 LEDs for SpO₂, HRM, or multi-wavelength HRM
Receiver:
- Supports 4 time-multiplexed photodiode inputs
- 2 parallel receivers (two sets of TIA/filter)
- Individual ambient offset subtraction DAC at each TIA Input with 8-bit per-phase control and range adjustable up to 255-µA
- Individual LED offset subtraction DAC at each TIA input with 5-bit per-phase control and 15.5-µA range
- Close to 100 dB ambient rejection up to 10 Hz
- Noise filtering with programmable bandwidth
- Transimpedance Gain: 3.7 kΩ to 1 MΩ
Supports external clock and internal oscillator modes
Option to acquire data synchronized with a system master clock
Automatic cancellation of DC from ambient, LED
FIFO with 128-sample depth
I²C interface
2.6-mm × 2.1-mm DSBGA, 0.4-mm pitch
Supplies: Rx: 1.7 V-1.9 V (LDO bypass); 1.9 V-3.6 V (LDO enabled), Tx: 3 V-5.5 V, IO: 1.7-3.6 V

Spezifikationen

Applications	HRV, Hearables, Optical-HRM, SpO2, Vo2 max	Number of input channels	4
Resolution (Bits)	22	Number of LEDs	6
Interface type	I2C	Operating temperature range (°C)	-40 to 85
Rating	Catalog	feature-resolution	24
feature-minimum-single-supply-voltage-v		feature-maximum-single-supply-voltage-v
feature-minimum-dual-supply-voltage-v		feature-maximum-dual-supply-voltage-v
feature-power-supply-type		feature-packaging
feature-rad-hard		feature-pin-count
feature-cecc-qualified		feature-esd-protection
feature-escc-qualified		feature-military	No
feature-aec-qualified		feature-aec-qualified-number
feature-eccn-code	EAR99	feature-svhc
feature-svhc-exceeds-threshold

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..