Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

AFE4950YBGR +BOM

Ultra-small integrated AFE for wearable optical heart-rate monitoring and SpO2

Hersteller:

Texas Instruments, Inc
Herstellerteil #:

AFE4950YBGR
Datenblatt:

AFE4950YBGR Datenblatt (PDF)
Number Of Channels:

1
Voltage - Supply, Analog:

1.7V ~ 1.9V, 1.9V ~ 3.6V, 3V ~ 5.5V
Voltage - Supply, Digital:

1.7V ~ 1.9V, 1.9V ~ 3.6V, 3V ~ 5.5V
Mounting Type:

Surface Mount
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an AFE4950YBGR

AFE4950YBGR Allgemeine Beschreibung

The AFE4950YBGR is a versatile analog front-end (AFE) designed for synchronized acquisition of PPG and ECG signals. It is ideal for a range of applications, including optical bio-sensing for heart-rate monitoring and measurement of peripheral capillary oxygen saturation. With its support for 2- and 3-electrode ECG configurations and integrated Right leg drive (RLD) buffer, the AFE4950YBGR offers a comprehensive solution for ECG signal acquisition. Additionally, its ability to monitor impedance between electrode pairs makes it suitable for continuous, low-power monitoring applications

Hauptmerkmale

Supports simultaneous and synchronized acquisition of up to 24 PPG and a single-lead ECG signal.
Flexible allocation of 8 LED, 4 PD in each phase
ECG signal chain:
- 1-lead ECG signal acquisition up to 2 kHz
- RLD output to drive a third electrode
- Input noise : 0.7 µV-rms
- Supports up to ±0.65 V differential DC offset and +/-0.55 V common mode range
- Programmable INA gain: 11, 21
- High-pass filter with quick saturation recovery
- Integrated 300 Hz anti-aliasing low pass filter
- AC, DC lead-off detect: 2.9 nA to 92.5 nA
- Low power continuous lead-on detection
Impedance signal chain
- Continuous low-power monitoring of impedance between 2 electrodes
- 7 MΩ range
- 300 Ω noise on 620 kΩ
PPG Transmitter:
- 8-Bit Programmable LED Current with range adjustable from 25 mA to 250 mA
- Mode to fire two LEDs in parallel
- Support of 8 LEDs in Common Anode configuration for SpO2, Multi-Wavelength HRM
PPG Receiver:
- 2 parallel receivers (two sets of TIA/ filter)
- Supports 4 Time-Multiplexed Photodiode Inputs to each Receiver
- 8-bit Ambient Offset subtraction at each TIA input with 256 µA range
- 8-bit LED Offset Subtraction DAC with 64 µA range
- Automatic ambient cancellation and dynamic LED DC cancellation at TIA input
- Ambient rejection close to 100 dB up to 10 Hz
- Noise filtering with programmable bandwidth
- Trans-impedance Gain: 3.7 kΩ to 1 MΩ
Accurate, Continuous Heart-Rate Monitoring:
- System SNR up to 109-dB at 16 µA PD current
- Low Current for Continuous Operation on a Wearable Device with a Typical Value: 15-µA for an LED, 20-µA for the Receiver
External clock and internal oscillator modes
Acquire data synchronized with system master clock
FIFO with 256-sample Depth
SPI, I²C interfaces: Selectable by pin
2.6-mm × 2.5-mm DSBGA, 0.4-mm Pitch
Supplies: Rx:1.7-1.9V (LDO Bypass); 1.9-3.6V (LDO Enabled), Tx:3-5.5V, IO:1.7-RX_SUP

Spezifikationen

Category	Integrated Circuits (ICs)Data AcquisitionAnalog Front End (AFE)	Series	-
Number of Bits	-	Number of Channels	1
Voltage - Supply, Analog	1.7V ~ 1.9V, 1.9V ~ 3.6V, 3V ~ 5.5V	Voltage - Supply, Digital	1.7V ~ 1.9V, 1.9V ~ 3.6V, 3V ~ 5.5V
Mounting Type	Surface Mount	Applications	1-lead ECG, BP, Dry electrode ECG, HRV, Optical-HRM, SpO2, Vo2 max
Number of input channels	4	Resolution (Bits)	22
Number of LEDs	8	Interface type	I2C, SPI
Operating temperature range (°C)	-40 to 85	Rating	Catalog
feature-resolution		feature-minimum-single-supply-voltage-v
feature-maximum-single-supply-voltage-v		feature-maximum-dual-supply-voltage-v
feature-power-supply-type		feature-packaging	Tape and Reel
feature-minimum-dual-supply-voltage-v		feature-rad-hard
feature-pin-count	36	feature-cecc-qualified
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	EAR99
feature-svhc		feature-svhc-exceeds-threshold	No

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..