Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

L4986A +BOM

PFC IC Continuous Conduction (CCM) 65kHz 10-SSOP

Hersteller:

STMicroelectronics, Inc
Herstellerteil #:

L4986A
Datenblatt:

L4986A Datenblatt (PDF)
Mode:

Continuous Conduction (CCM)
Frequency - Switching:

65kHz
Current - Startup:

400 µA
Voltage - Supply:

10V ~ 24.5V
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an L4986A

L4986A Allgemeine Beschreibung

The L4986 is a peak current-mode PFC controller for boost converter with a proprietary multiplier “emulator” which in addition to the innovative THD optimizers guarantee very low Total Harmonic Distortion (THD) performance in all operating conditions. The device comes in a pin SO package and offers a high performance/low-component count solution for CCM-operated boost PFC pre-regulators in EN61000-3-2 and JEIDA-MITI compliant applications, in a power range that spans from few hundred W to some kW.The device, thanks to a proprietary off-time modulator, operates in quasi-fixed frequency in all operating conditions. Two options are available, 65 kHz for A and 130 kHz for B.The 800 V high voltage start-up block includes also the circuitry to discharge the X-capacitors of the EMI filter to a safe level. This allows the unit to meet safety regulation (such as IEC 61010-1 or IEC 62368-1) without using the traditional discharge resistor in parallel to the X-capacitors.The device features low consumption and disable functions allowing usage in applications supposed to comply even with the latest energy saving requirements issued by Energy Star, the Department of Energy (DoE) in the United States, the European Code of Conduct, the European Union’s Ecodesign Directive, and other guidelines.In addition to an overvoltage protection able to keep the output voltage under control during transient conditions, the IC is provided also with a protection against feedback loop failures or erroneous settings and boost inductor saturation. The brownout protection function allows to design medical equipment according to the latest regulations driven by IEC 60601-1-2 which requires the output regulation in case of mains dips lasting up to 500 msec. Soft-start limits the peak current.The PG_IN is an adjustable input comparator suitable for monitoring the PFC output voltage and accordingly driving a logic signal exiting from PG_OUT pin. The totem-pole output stage, capable of 0.7 A source and 1.5 A sink current, is suitable for big MOSFET or IGBT drive.Low THD-High Efficiency, 1KW Bridgeless CCM-PFC .

Hauptmerkmale

Peak current mode CCM-operated
800 V high voltage startup with integrated input voltage sensing
Active input filter capacitor discharge
Proprietary multiplier “emulator” with minimum THD of line current in all operating conditions (CCM and DCM)
Extremely few external components
Protections: feedback loop failure, OVP, OCP, inductor saturation, brown-in, brownout (compliant to medical SMPS standards)
Inductor current sense
Disable and low consumption function
In-rush current monitoring
Soft-start for smooth startup
1.2% (@ Tj = 25 °C) internal reference voltage
65 kHz (A version) and 130 kHz (B version) switching frequency
PGOOD_OUT and adjustable PGOOD_IN
SSOP10 package

Spezifikationen

Category	Integrated Circuits (ICs)Power Management (PMIC)PFC (Power Factor Correction)	Series	-
Mode	Continuous Conduction (CCM)	Frequency - Switching	65kHz
Current - Startup	400 µA	Voltage - Supply	10V ~ 24.5V
Operating Temperature	-40°C ~ 150°C (TJ)	Mounting Type	Surface Mount
Base Product Number	L4986	Pin Count	10
Released Date	Sep 8, 2021	Last Modified Date	Mar 7, 2023 4:10 PM UTC

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..