Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

LC72366 +BOM

This Sanyo-manufactured IC features high-speed data transfer

Hersteller:

SANYO ELECTRIC CO LTD
Herstellerteil #:

LC72366
Datenblatt:

LC72366 Datenblatt (PDF)
Part Life Cycle Code:

Transferred
Pin Count:

80
HTS Code:

8542.31.00.01
Has ADC:

YES
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an LC72366

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Hauptmerkmale

ROM
— LC72358N: 8K steps (8191 × 16 bits)
— LC72362N: 12K steps (12287 × 16 bits)
— LC72366: 16K steps (16383 × 16 bits)
The subroutine area in both products is 4K steps
(4095 × 16 bits).
RAM
— LC72358N, 72362N: 512 × 4 bits (banks 0 to 7)
— LC72366: 1K × 4 bits (banks 0 to F)
Stack: Eight levels
Serial I/O:
Three channels (8-bit 3-wire format)
There are three internal serial clocks: 12.5 kHz,
37.5 kHz and 187.5 kHz.
External interrupts:
Two channels (the INT0 and INT1 pins)
Switching between rising and falling edge detection is
supported.
Internal interrupts:
Three channels
— Two internal timer interrupt channels
The timers provide eight interrupt periods: 100 µs,
1 ms, 2 ms, 5 ms, 10 ms, 50 ms, 125 ms and 250 ms.
— One serial I/O interrupt channel
Multiple interrupt levels:
Four levels
Hardware priority order
INT0 pin> INT1 pin> SI/O pin> internal timer 0>
internal timer 1
A/D converter: Six channels (6-bit successive approximation type)
General-purpose ports
— Input ports: 10
— Output ports: 28
— I/O ports: 25 (These pins can be switched between input and output in bit units.)
PLL block
— Built-in sub-charge pump for high-speed locking
— Support for dead zone control
— Built-in unlock detection circuit
— Twelve reference frequencies: 1, 3, 3.125, 5, 6.25, 9, 10, 12.5, 25, 30, 50 and 100 kHz
Universal counter: 20 bits
Supports frequency and period measurement with counting periods of 1, 4, 8 and 32 ms.
Timers: Timer interrupt periods
100 µs, 1 ms, 2 ms, 5 ms, 10 ms, 50 ms, 125 ms and 250 ms
Beep: Six frequencies: 2.08 kHz, 2.25 kHz, 2.5 kHz, 3.0 kHz, 3.75 kHz, 4.17 kHz.
Reset: Built-in voltage detection type reset circuit
Cycle time: 1.33 µs (all instructions execute in one cycle)
Halt mode: The microcontroller operating clock is stopped in halt mode.
There are four types of event that clear halt mode: interrupt requests, timer FF overflows, key inputs, and hold pin inputs.
Operating supply voltage: 4.5 to 5.5 V (3.5 to 5.5 V when only the controller block operates)
Package: QFP80E (QIP80E)
OTP version: LC72P366
Development tools:
Emulator .RE32N
Evaluation chip.LC72EV350
Evaluation chip board EB-72EV350

Spezifikationen

Part Life Cycle Code	Transferred	Pin Count	80
Reach Compliance Code		HTS Code	8542.31.00.01
Has ADC	YES	Address Bus Width
Clock Frequency-Max	5 MHz	DAC Channels	NO
DMA Channels	NO	External Data Bus Width
JESD-30 Code	R-PQFP-G80	Length	20 mm
Number of I/O Lines	66	Number of Terminals	80
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
PWM Channels	NO	Qualification Status	Not Qualified
ROM Programmability	MROM	Seated Height-Max	3 mm
Speed	5 MHz	Supply Voltage-Max	5.5 V
Supply Voltage-Min	3.5 V	Supply Voltage-Nom	5 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Form	GULL WING
Terminal Pitch	0.8 mm	Terminal Position	QUAD
Width	14 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..