Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

MB90F583 +BOM

16-bitProprietaryMicrocontroller

Hersteller:

FUJITSU
Herstellerteil #:

MB90F583
Datenblatt:

MB90F583 Datenblatt (PDF)
Paket/Koffer:

LQFP

MB90F583 Allgemeine Beschreibung

■ DESCRIPTIONThe MB90580B series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control applications which require high-speed real-time processing, such as consumer products.While inheriting the AT architecture of the F2MC*1 family, the instruction set for the F2MC-16LX CPU core of the MB90580B series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, the MB90580B has an on-chip 32-bit accumulator which enables processing of long-word data.The peripheral resources integrated in the MB90580B series include: an 8/10-bit A/D converter, an 8-bit D/A converter, UARTs (SCI) 0 to 4, an 8/16-bit PPG timer, 16-bit I/O timers (16-bit free-run timer, input capture units (ICUs) 0 to 3, output compare units (OCUs) 0 and 1), and an IEBusTM controller *2.Notes: *1: F2MC stands for FUJITSU Flexible Microcontroller, a registered trademark of FUJITSU LIMITED. *2: IEBusTM is a trademark of NEC Corporation. ■ FEATURES• Minimum execution time: 62.5 ns/4 MHz oscillation (Uses PLL clock multiplication) maximum multiplier = 4• Maximum memory space 16 Mbyte Linear/bank access• Instruction set optimized for controller applications Supported data types: bit, byte, word, and long-word types Standard addressing modes: 23 types 32-bit accumulator enhancing high-precision operations Signed multiplication/division and extended RETI instructions• Enhanced high level language (C) and multitasking support instructions Use of a system stack pointer Symmetrical instruction set and barrel shift instructions• Program patch function (for two address pointers)• Enhanced execution speed: 4 byte instruction queue• Enhanced interrupt function Up to eight priority levels programmable External interrupt inputs: 8 lines• Automatic data transmission function independent of CPU operation Up to 16 channels for the extended intelligent I/O service DTP request inputs: 8 lines• Internal ROM FLASH: 128 Kbyte MASKROM: 128 Kbyte (MB90583B) , 64 Kbyte (MB90587)• Internal RAM FLASH: 6 Kbyte MASKROM: 6 Kbyte (MB90583B) , 4 Kbyte (MB90587)• General-purpose ports Up to 77 channels (Input pull-up resistor settable for: 24 channels. Output open drain settable for: 8 channels)• IEBusTM controller* Three different data transfer rates selectable Mode 0: 3.9 Kbps (16 bytes/frame) Mode 1: 17.0 Kbps (32 bytes/frame) Mode 2: 26.0 Kbps (128 bytes/frame) *: IEBusTM is a trademark of NEC Corporation.• A/D Converter (RC) : 8 ch 8/10-bit resolution Conversion time: 34.7 µs (Min.) , 12 MHz operation• D/A Converter: 2 ch 8-bit resolutions Setup time: 12.5 µs• UART : 5 ch• 8/16 bit PPG : 1 ch 8 bits × 2 channels: 16 bits × 1 channel: Mode switching function provided• 16 bit reload timer: 3 ch• 16-bit PWC timer: 1 channel Noise filter provided. Available to pulse width counter• 16 bit I/O timer Input capture : 4 ch Output compare : 2 ch Free run timer: 1 ch• Internal clock generator• Time-base counter/watchdog timer: 18-bit• Clock monitor function integrated• Low-power consumption mode Sleep mode Stop mode Hardware standby mode CPU intermittent operation mode• Package: LQFP-100 / QFP-100• CMOS technology

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..