Diese Website verwendet Cookies. Durch die Nutzung dieser Website stimmen Sie der Verwendung von Cookies zu. Weitere Informationen finden Sie in unseren Datenschutzrichtlinie.

Die Bilder dienen nur als Referenz,

Siehe Technische Spezifikationen

MB90F594A +BOM

16-bitProprietaryMicrocontroller

Hersteller:

FUJITSU
Herstellerteil #:

MB90F594A
Datenblatt:

MB90F594A Datenblatt (PDF)
Paket/Koffer:

QFP
RoHS:
EDA/CAD Modelle:

Fordern Sie kostenlose CAD-Modelle für an MB90F594A

MB90F594A Allgemeine Beschreibung

■ DESCRIPTIONThe MB90590/590G series with two FULL-CAN*1 interfaces and FLASH ROM is especially designed for automotive and industrial applications. Its main features are two on board CAN Interfaces, which conform to V2.0 Part A and Part B, while supporting a very flexible message buffer scheme and so offering more functions than a normal full CAN approach.■ FEATURES• ClockEmbedded PLL clock multiplication circuitOperating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 MHz, 4 MHz to 16 MHz).Minimum instruction execution time : 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, VCC of 5.0 V)• Instruction set to optimize controller applications Rich data types (bit, byte, word, long word) Rich addressing mode (23 types) Enhanced signed multiplication/division instruction and RETI instruction functions Enhanced precision calculation realized by the 32-bit accumulator• Instruction set designed for high level language (C language) and multi-task operations Adoption of system stack pointer Enhanced pointer indirect instructions Barrel shift instructions• Program patch function (for two address pointers)• Enhanced execution speed : 4-byte instruction queue• Enhanced interrupt function : 8 levels, 34 factors• Automatic data transmission function independent of CPU operation Extended intelligent I/O service function (EI2OS) : Up to 10 channels• Embedded ROM size and types Mask ROM : 256 Kbytes/384 Kbytes Flash ROM : 256 Kbytes/384 Kbytes Embedded RAM size : 6 Kbytes/8 Kbytes• Flash ROM Supports automatic programming, Embedded Algorithm TM* Write/Erase/Erase-Suspend/Resume commands A flag indicating completion of the algorithm Hard-wired reset vector available in order to point to a fixed boot sector in Flash Memory Erase can be performed on each block Block protection with external programming voltage• Low-power consumption (stand-by) mode Sleep mode (mode in which CPU operating clock is stopped) Stop mode (mode in which oscillation is stopped) CPU intermittent operation mode Clock mode Hardware stand-by mode• Process 0.5µm CMOS technology• I/O port General-purpose I/O ports : 78 ports• Timer Watchdog timer : 1 channel 8/16-bit PPG timer : 8/16-bit × 6 channels 16-bit re-load timer : 2 channels

Hauptmerkmale

Clock
Embedded PLL clock multiplication circuit
Operating clock (PLL clock) can be selected from divided-by-2 of oscillation or one to four times the oscillation (at oscillation of 4 MHz, 4 MHz to 16 MHz).
Minimum instruction execution time : 62.5 ns (operation at oscillation of 4 MHz, four times the oscillation clock, VCC of 5.0 V)
Instruction set to optimize controller applications
Rich data types (bit, byte, word, long word)
Rich addressing mode (23 types)
Enhanced signed multiplication/division instruction and RETI instruction functions
Enhanced precision calculation realized by the 32-bit accumulator
Instruction set designed for high level language (C language) and multi-task operations
Adoption of system stack pointer
Enhanced pointer indirect instructions
Barrel shift instructions
Program patch function (for two address pointers)
Enhanced execution speed : 4-byte instruction queue
Enhanced interrupt function : 8 levels, 34 factors
Automatic data transmission function independent of CPU operation
Extended intelligent I/O service function (EI2OS) : Up to 10 channels
Embedded ROM size and types
Mask ROM : 256 Kbytes/384 Kbytes
Flash ROM : 256 Kbytes/384 Kbytes
Embedded RAM size : 6 Kbytes/8 Kbytes
Flash ROM
Supports automatic programming, Embedded Algorithm TM
Write/Erase/Erase-Suspend/Resume commands
A flag indicating completion of the algorithm
Hard-wired reset vector available in order to point to a fixed boot sector in Flash Memory
Erase can be performed on each block
Block protection with external programming voltage
Low-power consumption (stand-by) mode
Sleep mode (mode in which CPU operating clock is stopped)
Stop mode (mode in which oscillation is stopped)
CPU intermittent operation mode
Clock mode
Hardware stand-by mode
Process
0.5µm CMOS technology
I/O port
General-purpose I/O ports : 78 ports
Timer
Watchdog timer : 1 channel
8/16-bit PPG timer : 8/16-bit × 6 channels
16-bit re-load timer : 2 channels

Servicerichtlinien und andere

After-Sales- und Abwicklungsbezogen

Zahlung

Bezahlverfahren

TT/Überweisung

Paypal

Western Union

Geldgramm

Für alternative Zahlungskanäle kontaktieren Sie uns bitte unter:

[email protected]

Versand & Verpackung

Versandart

Fedex

UPS

DHL

NTN

Verpackung

AVAQ bestimmt und verpackt alle Geräte auf der Grundlage der Schutzanforderungen gegen elektrostatische Entladung (ESD) und Feuchtigkeitsempfindlichkeit (MSL)..